Bandwidth, Throughput & File Transfer Time Calculator
Calculate exact file transfer durations across 1GbE, 2.5GbE, and 10GbE networks, account for TCP and IP protocol overhead, and detect storage drive read and write bottlenecks.
Understanding Network Megabits vs. Storage Megabytes
The most common misconception in networking is the difference between Megabits per second (Mbps) used by ISPs and switch manufacturers, and Megabytes per second (MB/s) reported by Windows File Explorer, macOS Finder, and Linux rsync. Because there are 8 bits in one byte, a theoretical 1,000 Mbps Gigabit link can never exceed 125 MB/s under ideal conditions. When factoring in standard TCP/IP framing overhead, the real-world limit is approximately 118.6 MB/s.
Theoretical vs. Real-World Network Throughput Reference
| Link Standard | Raw L1 Bandwidth | Max Payload Speed (MTU 1500) | Jumbo Frames (MTU 9000) | Time to Transfer 1 TB |
|---|---|---|---|---|
| 100BASE-TX Fast Ethernet | 100 Mbps | 11.86 MB/s | N/A (No Jumbo Support) | 23h 25m |
| 1000BASE-T Gigabit Ethernet | 1,000 Mbps | 118.62 MB/s | 123.38 MB/s | 2h 20m |
| 2.5GBASE-T Multi-Gigabit | 2,500 Mbps | 296.56 MB/s | 308.44 MB/s | 56m 12s |
| 5GBASE-T Multi-Gigabit | 5,000 Mbps | 593.12 MB/s | 616.88 MB/s | 28m 06s |
| 10GBASE-T / 10G SFP+ | 10,000 Mbps | 1,186.25 MB/s (1.18 GB/s) | 1,233.75 MB/s (1.23 GB/s) | 13m 31s |
| 25G SFP28 Enterprise | 25,000 Mbps | 2,965.62 MB/s (2.96 GB/s) | 3,084.38 MB/s (3.08 GB/s) | 5m 24s |
Why Mechanical Hard Drives Bottleneck 10GbE Networks
When upgrading to 10-Gigabit Ethernet or multi-gigabit switches, the physical network cable is rarely the slowest component. A single 7,200 RPM enterprise SATA hard drive (such as a Western Digital Red Pro or Seagate IronWolf Pro) sustains a maximum sequential write speed of 200 to 250 MB/s on outer disk tracks, dropping to 110 to 140 MB/s on inner sectors. Because a 10GbE network demands 1,186 MB/s to achieve 100% saturation, transferring a single large file to a single spinning disk will bottleneck at the drive's 220 MB/s limit—leaving 80% of your 10GbE bandwidth idle. To fully saturate 10GbE, storage pools must utilize NVMe SSD caching, all-flash arrays, or at least 6 to 8 spinning disks in a striped RAID 10 or ZFS mirror configuration.
How Jumbo Frames (MTU 9000) Boost Throughput
Standard Ethernet transmits data in 1,500-byte frames. Sending 1 Gigabyte of data requires generating, transmitting, and parsing over 700,000 individual packets, each requiring interrupt handling by the operating system CPU. Enabling Jumbo Frames (MTU 9000) expands payload size six-fold, reducing packet count to approximately 116,000 packets per Gigabyte. This reduces CPU interrupt utilization by up to 40% and recovers roughly 4% of pure payload bandwidth (boosting 10GbE throughput from 1,186 MB/s to 1,234 MB/s).